Having problems with your Canon Digital Cameras ?

Every time i turn on the canon powershot SX 150 si I have to input the time stamp


\015 Everytime I turn on the canon Power Shot sx150 is I have to reset the time stamp. Can this be fixed\015

Answers :

Repair Help & Product Troubleshooting for Canon Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Every time i turn on the canon powershot SX 150 si I have to input the time stamp


... Canon Digital Cameras

I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp


There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Every time I turn on my Canon A540 Powershot I get the black date/time screen. The date/time is all zero (the photo properties default to 1 Jan 1980) and I have to either enter the date/time or press Func/Set to clear the screen. Whichever option I take.. the same thing happens every time. Is there a way to make the date/time "stick"? I first noticed the problem when one set of batteries was low.. but new batteries didn't solve it. Any ideas? Camera doesn't have a lot of miles..


Inside the battery compartment, right beside the AA batteries, there's a tiny little door labeled CR1220 (see this picture). ... Canon PowerShot A540 Digital Camera

Canon Powershot A470 - asks to 'change battery' every time it is turned on, then turns off immediately. This is so even when new, fully charged batteries (different brands, rechargeable, non-rechargeable) are inserted. Any ideas on how to remedy this?


At maximum, NimH rechargeable batteries reach 1.2volts, instead of the full 1.5-1.6volts of a standard battery. I recommend using Lithium batteries, vs. std or Alkaline batteries, as the Li batteries seem to hold a charge longer. \015\012 ... Canon PowerShot A470 Digital Camera

Every time I try to turn on my Canon PowerShot SD850 IS digital camera, the display screen states that a lens error has occurred. I checked the camera multiple times and there seems to be no problem with the lens. What can I do to solve this problem?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD850 IS Digital Camera

I have a canon powershot SD850 IS digital ELPH camera. Every time i turn the camera on it beeps three times and says "Lens Error, Restart Camera" then it shuts off.


Lens errors are displayed when the camera cannot move the lens or something is slowing it down.Accidental damage may have occured including the possibility of it being dropped or having something spilled inside of it.Determine ... Digital Cameras

I have a Canon PowerShot SX120IS - it will not store the date - I have to reset every time I turn the camera on - any ideas?


You may have to replace the date/time battery. See the instructions on page 124 of the manual. ... Canon PowerShot SX120IS

I recently received a Canon Powershot S200 Digital Elph, and When I put the CF card into the slot, every time it is turned on it says CF error. Any way I can fix this?


Did you ever format the card in the camera before trying to use it? This will erase the card so download any pics first using a card reader if necessary. Formatting will get your card working. ... Canon PowerShot S200 / IXUS 178 Digital Camera

How do you turn on date and time stamp on the Canon Powershot SD750. Its grey out in the menu settings


On my Canon this function is only available when the camera's resolution/format is set to Postcard. ... Digital Cameras

My Canon Powershot Pro1 will not accept the memory card. The screen flashes "Memory Card Error" every time I turn it on.


Your camera uses a Compact Flash card so it's asking you to format the card.Here is a diagram to show you were to go and the process for formatting the memory cardDiagram ... Canon PowerShot Pro1 Digital Camera

My Canon PowerShot SD1100 IS Digital Elph won't turn on. I recharged the battery and put it back in, but every time I push the "on" button there are several beeping noises and the screen says "Lens error, restart camera."


This should help.I've had similar problems with various versions of this camera. Here's \015\012the fix, if all else fails. These are step-by-step instructions to take \015\012apart and fix the camera's lens error. \015\012http://johnsmou ... Digital Cameras

Every time I set the date/time on my camera and turn the camera off and back on, it prompts me to reset the date/time???? Canon Powershot sx110 IS


Replace the date/time battery on the side of the camera. ... Canon PowerShot SX110 IS Digital Camera

My Canon G9 requires that I input the date/time every time I turn it on. I think the internal lithium battery is dead, but the manual does not cover it replacement.


Hi there\015\012\015\012The button cell lithium battery will require replacement. You should be able to locate it under a flap. It may be behind the main battery, so remove that first. Once you remove the button cell battery, note its num ... Digital Cameras

How do I turn off the date and time stamp on my canon powershot sx110?


The menu on the camera controls the date and time stamp. Turn on the menu i camera mode, there are three choices, Camera, Settings and customize. Time stamp should be in the middle menu. Look for time settings and turn it off. All pictures have time ... Canon Powershot SX110 IS Digital Camera 9.0MP

Describe your canon rebel hinge door error 99 Problem I get error 99 every time I try to shoot. Although, if I turn on the camera and open the door and close it while the camera is on I can shoot. So, there fore I have to turn on the camera (error 99 shows up) open up the hing door and shoot. I have to so this every time I want to shoot!


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon Rebel XT / EOS 350D Digital Camera

My lens keeps saying lens error 113,0,0,0 and the lens would not get open each time I turn it on.The message is being persistent at every time I press on


Lens errors are NOT the sole ownership of Canon. These occur for ALL cameras with telescopic lens barrels. It's a very common problem in digital cameras. Canon sticks out from the other vendors because they used the cryptic "E18" error code to ... Kodak EasyShare M853 Digital Camera

Powershot A560 I have a Canon Powershot A560 but now when I turn it on it beeps 6 times and the screen shows "canon" in blue but then goes black and says at the bottom "lens error, restart camera". Also, then lens never fully goes in or out. Help.


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot A560 Digital Camera

Time Stamping I lost the direct print user guide for my canon powershot S2 1S and I need the date and time stamp to appear on each picture when I download it to my computer, and when I print them off. Any help would be appreciated!


Go here for guides and manuals:\015\012\015\012http:/ ... Canon PowerShot S2 IS Digital Camera

Canon A510 Powershot camera will not stay powered on when I turn it on in picture-review mode. It comes on for a second --> Canon screen flashes on -- and then shuts off. In picture-taking mode, it seems to be fine. It stays on. But if I switch to review mode, it turns off. I've changed the batteries. It was fine last time I used it, last week. I left it plugged into the PC for a few days, if that makes any difference.


These cameras have capacitors built into the circuitry. A capacitor holds a higher voltage so the camera will operate when in use. Some modes in these cameras do need a higher voltage to work. The capacitor for the review mode is weak and will need t ... Digital Cameras

I have a canon SD1100 I just purchased and after a few minutes the camera will not shut off, the power button won't work and I have to open the battery cover to turn it off. Somehow this completely drains the battery too every time even if it was just charged. Also the camera turns itself on by itself about 10 minutes after you put the battery in it and once again you can't turn it off. I got another battery and the same thing happens. Otherwise it works fine.


If this is a new camera, you should be running back to the store to return it. ... Canon PowerShot SD1100 IS Digital Camera

Canon SD400 turn off date-time stamp


... Canon PowerShot SD400 / IXUS 50 Digital Camera

CANON SX1000IS camera won't turn on, batteries good, problem with date/time coming on (battery good) program date/time will work but must program every time camera is turned on


... Canon Digital Cameras

I have a canon powershot a560. i would like the date on the pictures. i followed the manual which says turn on date stamp in the menu but it skips over the date stamp so i can't change it. any suggestions?


When you turn your camera on, there is a screen which appears in the viewfinder. Push the FUNC SET button and then scroll down the column on the left of your viewfinder until you come to the one with the letters M1 M2 M3 S, etc to the right. Then sel ... Digital Cameras

Canon powershot SD780 is camera. Camera shows the canon screen then turns black and beeps three times then says "lens error restart camera". I don't know how to restart...i need to use it I'm on a trip What do I do?


There's really no way to restart it if there's a physical problem with the lens. Try to power it on again but if that doesn't reset it, the camera needs to be serviced. A great site for help with these is: camerasandparts.com They just specialize in ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3141 seconds